The shutter motor runs backwards.

I have a new 3M dome, SN620. When I hooked up the shutter motor, it runs the wrong direction. The close button on the control box opens the shutter, and the open button closes it. The limit switches are hooked up correctly. Triggering the limit switch at the top will stop the shutter while it is closing and the switch at the bottom will stop the shutter when it is opening. It is the direction of the shutter travel that is backwards. I attached a picture of how the motor is mounted (ignore the limit switch in the picture, it was not adjusted yet.)

Has anyone had this problem and know what the answer is?